The multifunctional hydrotherapy bath is designed for hydrotherapeutic procedures in fresh and low-mineral water.
The hydrotherapy bath allows you to carry out the following procedures:
underwater shower massage (UDM)* – exposure of the patient’s body to a water jet of various shapes and strengths, directed under water using a hose with special nozzles:
There are four types of nozzles: 4 round - different in diameter of the outlet (supplied in the kit), crevice, rain and underwater hydro-vacuum massage - optionally made to order.
- Nozzles with round holes of different diameters (jet) are used for local, softer (holes of larger diameter) or rougher (holes of smaller diameter) massage.
- A nozzle with several holes (rain) is available upon request and is recommended for the initial massage of the patient’s body before the main cycle of procedures with a higher pressure of the hydromassage jet, as well as for massage of the abdomen, arms, and joints.
- The crevice nozzle (crevice) is available on request and is used for back massage in the spine, legs and arms. In this case, the jet is directed according to the up-down principle, and not in a circular motion.
These attachments are multifunctional: they are used for general massage, to treat specific areas of the body, for weight loss and body shaping, for the prevention and treatment of diseases of the musculoskeletal system. The procedure time is 7–15 minutes.
- The underwater hydro-vacuum massage system is supplied to order and has a consistent local effect on the areas of the legs, hips, abdomen, arms and back. Underwater hydro-vacuum massage is a fundamentally new technology for comprehensive skin rejuvenation, thanks to which it is possible to influence both the entire surface of the skin and all layers of the skin during one procedure. At the same time, the massage therapist-operator makes slow, uniform movements, pressing the nozzle directly to the body or placing it at a short distance. The procedure, depending on the indications, can take from 10-15 to 45 minutes and is prescribed in a course of 5 to 15 procedures. The result becomes noticeable after the 1st session.
The PDM procedure combines the therapeutic and beneficial effects of the aquatic environment and the mechanical massage effect of a jet of a given intensity. High effectiveness of the effect is achieved due to the relaxation of the patient in water at a comfortable temperature, relieving spasms and muscle tension. The intensity of the water jet during a shower massage is adjusted depending on the patient’s sensations. The type and shape of the jet can be changed using special nozzles, thereby selecting the optimal treatment program for a particular person. There are four types of nozzles: 4 round - different in diameter of the outlet (supplied in the kit), crevice and rain - made optionally to order.
- automatic underwater hydromassage – exposure of the patient’s body to jets of water simultaneously coming from a system of hydronozzles located in the Bath. The hydromassage system includes 24 hydro nozzles located in the forearms, back, hips, inner and outer legs, as well as in the feet.
Automatic underwater hydromassage helps restore the correct water balance in the tissues of the body, serves to stimulate the breakdown of fats and increase the tone of the skin and muscles, improves the structure and color of the skin, increases the supply of nutrients to it, saturates the skin cells with oxygen, removes waste and toxins from the body, activates his protective powers.
During the session, due to the effect of warm water, muscle tension is minimized, which increases the effectiveness of the procedure.
Hydromassage reduces reflex excitability, reduces the tendency to spasms, and provides an analgesic effect.
- automatic underwater aeromassage - the impact on the body of a patient immersed in water with a large number of small air bubbles, creating streams of warm air passing through the water.
The air massage system includes 16 air nozzles located at the bottom of the bath, each of which has 6 bubble holes. When the aerosystem is turned on, air bubbles are evenly distributed throughout the entire volume of the bath.
Automatic underwater aeromassage provides a more comfortable hydrotherapy procedure, promoting relaxation, eliminating fatigue, restoring physical and emotional strength, improving mood and overall well-being.
- chromotherapy – using built-in LED lamps, a uniform distribution of light of a wide range of colors is created. Smoothly replacing each other, the colors have a healing effect both on the patient’s body, causing physiological reactions in the body’s tissues, and on his visual analyzers, thereby influencing the central nervous system.
The chromotherapy system is represented by 1 diode lamp, which has 2 LED operating modes: a mode of smooth transition of light from one to another and a mode of monochrome radiation of one of 5 primary colors (blue, red, yellow, green, white).
Overall dimensions of the bath (LxWxH), mm 2060x980x950
Internal (largest) dimensions of the bathtub (LxWxH), mm 1600x810x520
Connecting hot water and cold water 1/2" pipe
Mineral water tap connection 1/2" pipe
Connecting the compressed air supply valve 1/2" pipe
Bath filling time, min
* When the water pressure in the supply line is 4.5 bar. 6±1
Bath drain time, min 5±1
Drain hole diameter, mm 50
Maximum volume of water filled, l 480±5%
Useful volume of the bath, l 340±5%
Maximum power consumption, W 3750
Noise level, dBA 55
Rated power consumption, W:
Hydraulic pump of injectors* 2x1500
Aerocompressor* 450
PDM pump* up to 1100
Light, chromotherapy (1 lamp, 5 changing colors)* 10
Chromotherapy system (16 powerful LEDs, shimmering in different colors)* 10
Deviation of the built-in thermometer readings from the actual water temperature, °C ±2
Pressure in the PDM hose, bar from 0.4 to 4.8 (on a nozzle with a smaller diameter)
Rated voltage, V220(±10%)
Weight of standard bathtub no more than, kg
Attention: the weight of the bathtub may vary depending on the configuration 150