Aeon7200A is an anesthesia-respiratory apparatus for children and adults with a built-in color monitor of respiratory functions. Allows you to carry out inhalation anesthesia with a respiratory mixture of oxygen with nitrous oxide and two liquid anesthetics and provide ventilation support to the patient in controlled and manual ventilation modes.
Using this device, you can simply and quickly set the patient’s breathing parameters for any operations that do not require complex ventilation modes.
The Aeon7200A allows you to create a breathing mixture using oxygen, nitrous oxide and liquid anesthetics (halothane, isoflurane, sevoflurane).
The built-in color LCD monitor is used to monitor ventilation parameters, oxygen concentration in the patient's exhalation and display messages about alarming events.
The Aeon7200 anesthesia resuscitation device is suitable for patients weighing over 10 kg.
Peculiarities
- Modern lightweight and durable design
- Dismountable and sterilizable breathing circuit
- Compact absorber with low flow resistance
- Built-in gas monitoring system with safety valve
- Work on a half-open, half-closed and closed contour
- Low noise level of the device
- High reliability, measurement accuracy and safety
Built-in fan
- Drive: by gas supply, electronic control
- Ventilation modes: volume ventilation, manual ventilation
- Tidal volume: 0–1600 ml
- Respiratory rate: 4–100 breaths per minute
- Inhalation/exhalation ratio: 4:1–1:8
- PEEP level: 0–20 cmH2O
- Inspiratory pause: Off, 5% - 60% of inspiratory time
Specifications
Monitoring:
- display: 7” color LCD display
- Airway pressure (Paw, Ppeak, Pplat, Pmean)
- Minute volume
- Tidal volume
- Breathing rate
- Exhaled oxygen concentration
- Curves: pressure-time, flow-time
O2 gas supply range:
- 02: 1–10 l/min
- N2O: 0–1, 1–10 l/min
Anesthetic vaporizers: Halothane, Isoflurane, Sevoflurane (1 optional, the rest optional)
Alarms:
- High airway pressure
- Low airway pressure
- High minute volume
- Low minute volume
- High level of FiO2 concentration
- Low FiO2 concentration
- Power failure
- Low oxygen inlet pressure
Gas supply: 0.28–0.6 Mra
Power supply: mains and built-in battery (up to 120 minutes)
Possibility of installing a compressor (optional)