Multi-slice Computer Tomograph 128 slice

I. Configurations:
Hardware:
Name Model Brand Quantity
X-ray system generator CTHVG X5001 Spellman 1
X-ray tube XRC-5552X Canon 1
Collimator CTXS-5A WDM 1
Imaging System WD-CT Imaging Software Acquire WDM 1
Detector WDDAS-5A WDM 1
24" WDM Color LCD Monitor 1
Workstation CT WDM Server 1
Other equipment Portal SMJ-2 WDM 1
Patient table SMC-2 WDM 1
Console CT CTKZT-1 WDM 1
Control unit CT CTBOX-2 WDM 1
Power distribution PSB-10 WDM 1
Smart eye function (including camera) CTSXT-1 WDM 1
Post Processing Workstation Post Processing Workstation System 23" WDM Color LCD Monitor 1
WDM workstation computer 1

II. Data sheet:
Detector Scintillator material Scintillator + photodiode
Physical line number 64 lines
Number of detection units row 48640
Minimum size of the detector block along the Z axis: 0.5 mm.
Tube and generator Anodic target surface Rhenium Tungsten alloy
Heat capacity of the tube 5MHU
Tube type Liquid metal containing metal
Tube cooling method Oil cooling and wind cooling
High voltage generator power 50 kW.
Optional tube voltage range: 70 kV, 80 kV, 100 kV.
120 kV, 140 kV
Maximum tube output current 420 mA
The minimum output current of the tube is 10 mA.
Focus tube (Small, Large) 0.9mm×0.7mm
1.4 mm × 1.4 mm
Gantry Type Slip Ring Low Voltage Slip Ring
Drive path Leather drive belt
Data transmission mode Radio frequency and optical fiber
Scanning frame aperture 760 mm.
Simulated scan frame tilt angle ±30°
The portal system can be controlled remotely. Yes.
3D laser positioning system Yes
Portal cooling mode Wind cooling
Portal control panel Yes
Graphic prompts for breathing control Yes
Voice prompts for breathing control Yes
Table Maximum travel range 2100 mm
Maximum scanning range per helix 1620 mm (optional 1750 mm)
Table lift range 540 mm.
Foot switch table control Yes
The maximum load-bearing capacity of the table is 210 kg.
Table movement control Manual and motorized
Scan parameters Scan layer/360° 16 image slices/360°
Fastest scan time /360° 0.49 s/360°
The thickness of the thin image scanning layer is 0.5 mm.
The thinnest image restoration layer is 0.5 mm thick.
Step range 0.15-2.0
Free field selection Yes
Scan mode Positioning, axial, spiral
Image reconstruction matrix 512×512, 768×768,
1024×1024
Image display matrix 512×512, 768×768,
1024×1024
Maximum scanning field of view 500 mm
Scanning time for one spiral 100 s
Spatial resolution 21LP/CM
Density resolution 2 mm at 0.3%
Data acquisition workstation Display screen size ≥24 inches
Memory ≥16GB
Hard drive 500G +2T SATA SSD TLC
CPU ≥6 cores
Image format and transmission storage: DICOM 3.0 standard Yes
Automatic voice system and two-way voice Yes
Synchronous Parallel Image Processing Function Yes
Remote Control Service Diagnostic Interface Yes
DICOM3.0 interface for laser camera Yes
Report module Yes
Print module Yes
Post-processing workstation Display screen size ≥23 inches
Memory ≥16GB
Hard disk ≥6 cores
CPU
CPU ≥1T
Image storage capacity (512×512) ≥800,000
Two-way image transfer between workstation and host computer Yes
Image transfer rate from host to workstation (fps) 50 fps
Image format and transmission memory: DICOM 3.0 standard Yes
Laser Camera DICOM3.0 Interface Yes
Permanent storage and combustion method Yes
Two-way transmission of recorded images Yes
With all DICOM3.0 Yes
Print module Yes
Intelligent eye function Automatic recognition of patient position Yes
Automatic recognition of the height of the center of the patient examination site Yes
Automatic positioning image range detection Yes

Clinical diagnostic software:
Low dose lung scanning technology Yes
Low dose pediatric scanning technology Yes
Intelligent tube current automatic control technology Yes
Interactive Noise Reduction Yes
Radiation hardness artifact correction software Yes
Posterior fossa image optimization Yes
Motion Artifact Removal Technology Yes
Metal Artifact Removal Technique Yes
Various artifact removal methods Yes
Automatic video playback Yes
Automatic lamp current control function Yes
CPR surface reconstruction function Yes
Maximum Projection Density MIP Yes
Minimum Density Projection MinIP Yes
Average Density Forecast AIP Yes
Virtual endoscope function Yes
Simulate scalpel technology Yes
3D volume mapping VR Yes
Tabletop stand Yes
Print module Yes
Automatic typing and printing Yes
DICOM features include DICOM PRINT, DICOM STORE, DIOCM QUERY, DICOM RETRIVE, WORKLIST and PPS Yes.
Connection to existing his.ris equipment Yes