Delivery bed

A modern 4-section delivery chair-bed is used during all stages of childbirth for a more convenient and comfortable position for the patient. Each element of the chair-bed model interacts with each other, can be temporarily connected or perform a function independently. The retractable trolley for the chair can be located in three positions: in the middle position, completely hidden under the chair, in the bed position. The chair's height adjustment, backrest angle, Trendelenburg position and seat are electrically adjustable.

Description:
The bed is equipped with the following functions: changing the height of the bed, changing the angle of inclination of the back and thigh sections, adjusting the longitudinal slopes (Trendelenburg and Anti-Trendelenburg) and the function of quick unlocking of the back section (CPR).
The bed has three control systems: a central control panel (supervisor), a wired control panel and control panels in the side rails.

To increase patient safety, control panels located on the inside of the side rails are equipped with a function for night floor lighting and calling medical personnel. For the same reason, the functions of the wired control panel require confirmation using a special key.

Control panels on the outer sides of the side rails allow you to quickly set the birthing bed to the Trendelenburg and Anti-Trendelenburg positions. The central control panel allows you to set the Fowler position, zero position, examination position and cardiac chair position.

Standard equipment:
•   Mattress
•   Pull-out, removable body fluid tray
•   Knee supports
•   Central control panel (supervisor)
•   Footrests
•   Quick back release (CPR) lever

Benefits of the bed:
•   Wide range of adjustments creates multiple patient positions
•   Three control systems (one of which is for the patient)
•   Low bed height for easy standing up.
•   High level of technical performance

Position of the patient on the chair-bed:
The bed can easily be transformed into a comfortable multifunctional chair, which guarantees a woman in labor of any size a comfortable position in the optimal position for her at all stages of the birth process:
•   Cardiac chair position
•   Gynecological examination position
•   Fowler's position
•   Zero position

Electrical control devices:
Central control panel (supervisor)
Wired hand-held remote control with locking (key)
Control panels on the side rails (outside with Trendelenburg and Anti-Trendelenburg position functions)
Control panels on the side rails on the inside with the function of night floor lighting and calling medical personnel
Side guards are equipped with a lowering mechanism
Foot pedal (optional)

Operating parameters:
The bed mechanisms allow you to change the height of the bed, the angle of inclination of the back section and lower leg section, Trendelenburg and Anti-Trendelenburg inclination, as well as move the bed.
Possibility to change the angle of the back section using the CPR lever.
Changing the height of the bed, longitudinal tilts (Trendelenburg and Anti-Trendelenburg), changing the angle of inclination of the back section and leg support (thigh section) is carried out using electric drives.

Specifications:
•   Total length – 2165 mm ± 20 mm
•   Total length in chair position – 1780 mm ± 20 mm
•    Maximum width (with side rails) – 965 mm ± 5 mm
•    Minimum stock frame height – 580 ± 10 mm
•    Maximum stock frame height – 980 ± 10 mm
•    Seat elevation angle – 30° ± 5°
•    Angle of lift of the back section – 70° ± 5°
•    Trendelenburg position – 20° ± 2°
•    Anti-Trendelenburg position – 20° ± 2°
•    Bed weight – about 160 kg
•    Permissible load – 250 kg
•    Permissible load of the retractable section – 170 kg
•    Power supply – 230 V~, 50/60 Hz
•    Power consumption – max 250 VA
•    Protection class –  II
•    Working part type – B
•    Degree of protection –IP-X4